光学波段菲波纳契序列一维光子晶体纳米膜传输特性研究

为了研究光学波段菲波纳契序列一维光子晶体纳米膜的传输特性,应用传输矩阵方法数值模拟各种情况下的透射率即传输函数随频率的变化.数值结果表明在正入射时,菲波纳契序列一维光子晶体中的禁带宽度、中心位置、数目都与构成序列的项数、组元物理厚度、组成序列组元初始次序、组元折射率差值都对传输特性有较大影响,在可见光区组元折射率差值越大越易形成较宽禁带,进一步研究广义菲波纳契序列一维光子晶体纳米膜的传输特性,发现比典型情况更易在可见光区形成禁带.     

Dispersion and Confinement Loss Control in Modified Hexagonal Photonic Crystal Fibers

This paper presents a novel technique for the control of chromatic dispersion and confinement loss in hexagonal photonic crystal fibers (H-PCFs). It is demonstrated that it is possible to obtain very low chromatic dispersion of 0 ± 0:38 ps/(nm·km) in the wavelength range of 1.41 to 1.66 μm and confinement loss of less than 0.0001 dB/km from a six ring modified H-PCF (MH-PCF). The higher order dispersion at 1.55 μm is about −0.001 ps/(nm²-km).     

Spatial and frequency domain effects of defects in 1D photonic crystal

The aim of this paper is to present the analysis of influence of defects in 1D photonic crystal (PC) on the density of states and simultaneously spontaneous emission, in both spatial and frequency domains. In our investigations we use an analytic model of 1D PC with defects. Our analysis reveals how presence of a defect causes a defect mode to appear. We show that a defect in 1D PC has local character, being negligible in regions of PC situated far from the defected elementary cell. We also analyze the effect of multiple defects, which lead to photonic band gap splitting.     

一维光子晶体热辐射光谱控制模拟研究

将一维金属-介质光子晶体应用于热辐射光谱控制,基于电磁波理论建立了光谱能量关系和光谱特性计算方法.采用钨(W)和二氧化硅(SiO2)设计了一维金属-介质光子晶体,从麦克斯韦方程组出发,研究了该一维结构的光谱特性.研究结果表明,该结构能够有效地结合材料自身光谱属性和光子晶体的光谱控制特性实现热辐射光谱特性的选择控制,可被用于热光伏系统实现热辐射光谱控制.     

高功率宽调谐范围掺Yb3+光子晶体光纤激光器

采用闪耀光栅作为色散元件,构建了前向、后向输出两种结构的可调谐掺Yb3 光子晶体光纤激光器,并对其输出特性进行了分析研究.在抽运功率5.75W时,前向输出结构实现了1050.6～1110.2 nm的连续调谐输出,光谱线宽约0.1 nm,边模抑制比大于44 dB.在调谐激光波长为1085 nm时,得到最高输出功率677 mW.结构改进的后向输出结构的可调谐输出结构在抽运功率4.43 W,调谐波长1075 nm,实现了2.21 W的功率输出,斜率效率为73%;调谐范围50.9 nm(1042.1～1093 nm),光谱线宽小于0.08 nm,边模抑制比大于50 dB.两种结构的可调谐激光器输出均为线偏振光,偏振度大于89.5%.     

脉冲激光诱导光纤损伤的测试方法

 针对传能光纤的高峰值功率激光损伤过程，研究了光纤损伤测试方法。实验装置搭建中增加了定位孔，有利于激光注入光纤对准；分别采用刀口法和CCD法对入射光束不同截面处光斑大小进行了测量，两种方法的测量结果基本一致。参考GJB1487-92激光光学元件测试方法和ISO11245光学表面的激光诱导损伤阈值测试方法，采用N-ON-1损伤测试和有效光斑面积计算方法对芯径为400 μm的石英包层阶跃折射率石英光纤进行了损伤阈值测试。实验发现：光纤损伤部位全部为入射端面，利用200倍显微镜观察光纤端面，出现明显永久性损伤点。最后采用统计学原理和线性拟合等方法得出测试光纤的端面零概率损伤阈值为3.85 GW/cm²。     

两端对称负折射率缺陷复合光子晶体:多通道滤波和光开关

采用传输矩阵法对两端对称负折射率缺陷复合光子晶体结构[D(AB)mD]N的透射特性进行了研究.结果表明:当N=2时,该结构透射谱的禁带出现两个完全共振透射峰,当N增加时,每个共振透射峰又分裂为N-1条；当复合光子晶体的层数m逐渐增加时,透射峰的品质因子逐渐提高,且分裂的共振透射峰距离逐渐减少；既为该结构实现高品质的多通...     

Rainbow trapping based on long-range plasmonic Bragg gratings at telecom frequencies

The group velocity of long-range surface plasmon polaritons (LRSPPs) in a wide frequency bandwidth at infrared frequencies is significantly reduced by dielectric gratings of graded thickness on both sides of a thin metal film. This structure can reduce the propagation loss of slow surface plasmons in "rainbow trapping" systems based on plasmonic Bragg gratings. Compared with dielectric gratings of graded thickness on a single side of a metal film, the proposed structure is able to guide slow light with a much longer propagation distance for the same group index factor. Finite- difference time-domain simulation results show that slow LRSPPs with the group velocity of c/14.5 and the propagation distance of 10.4 μm are achieved in dielectric gratings of uniform thickness on both sides of a thin metal film at 1.62 μm.     

Cavity modes in one-dimensional photonic crystal slabs

A theoretical study of cavity modes in one-dimensional photonic crystal slabs embedded in Silicon-on-Insulator structures is reported. Three different methods are employed, namely a guided-mode expansion in which the coupling to radiative modes is treated by perturbation theory, a grating or scattering-matrix method for calculating the surface reflectance, and a Fourier modal expansion for in-plane transmission calculations. It is shown that all methods lead to the same values for the quality factors of cavity modes for both first- and second-order Bragg mirrors. We conclude that the quality factor of a cavity mode can be determined with optical reflectance from the surface of the slab.     

Tunable All-Optical Microwave Filters Based on Fiber Loop and Chirped Fiber Bragg Gratings

All-optical microwave filters are important parts of fiber-optic microwave/millimeter wave processing systems. In this paper, two novel passive tunable all-optical microwave filters based on fiber loop and chirped fiber Bragg gratings (CFBGs) are demonstrated, where the frequency response of the both filters can be continuously tuned by adjusting the wavelength of the input light. The required free spectral range (FSR) of the filters can be obtained by carefully controlling the length of fiber loop and the positions of the CFBGs in the fiber loop. Experimental results prove the feasibility of the proposed filtering structures.